 |
 |
 |
 |
 |
|
 |
| 1/2" Jaws: 53463-8651 |
3/4" Jaws: 53463-8651 |
1" Jaws: 53463-8661 |
1-1/4" – 2" Actuator: 53463-8680 |
1-1/4" Collar: 53463-8671 |
1-1/2" Collar: 53463-8681 |
2" Collar: 53463-8691 |
FASTLOCK™ fittings are for use with FASTLOCK™ approved jaws, actuators, and collars only. FASTLOCK™ jaws are suited for use on most 1/2" – 2" press tools available with a press force of at least 32kN. Jaws must be clean and handled carefully to prevent any damage that could cause malfunction. Before making any connections, make sure that the jaws are properly mounted on the press machine. FASTLOCK™ jaws must be used with an approved press tool for sizes up to 2" with a press force of at least 32kN (7193.8 lbf) and operating either at 110 volts or on battery power. FASTLOCK™ jaws are compatible with press tools by Ridgid®, Rothenberger®, REMS®, and Stanley® VIRAX®. Use the table below to determine if your press tool is compatible with FASTLOCK™ jaws.
| Press Tool | FASTLOCK™ Compatible? |
| Ridgid® 100-B | NO |
| Ridgid® 210-B | NO |
| Ridgid® CT-400 | YES |
| Ridgid® 320 E | YES |
| Ridgid® 330-C | YES |
| Ridgid® 330-B | YES |
| REMS® Power-Press E | YES |
| REMS® Power-Press 2000 | YES |
| REMS® Power-Press ACC | YES |
| REMS® Akku-Press | YES |
| REMS® Akku-Press ACC | YES |
| Rothenberger® ROMAX Compact | NO |
| Rothenberger® ROMAX AC ECO | YES |
| Stanley® VIRAX® M20+ | NO |
| Stanley® VIRAX® P20+ | YES |
